Body Shop Equipment.net - Col-Met Classic Auto/Truck Paint Booth

HOME - ONLINE STORE! - PAINT BOOTHS - FILTERS - MOCLAMPS - FRAME RACKS & LIFTS
INSTALLATION - SERVICES - USED EQUIPMENT - REQUEST FORM - CONTACT US

Col-Met CLASSIC Auto/Truck Spray Booth
Model: CM CLASSIC

*CLASSIC* AUTO/TRUCK SPRAY BOOTH • HEAVY DUTY CONSTRUCTION • ANGLED TOP LIGHTING • QUALITY DESIGN OPTIONS
DESCRIPTION The Classic Auto/Truck Crossdraft Booth intakes fresh air through filters in the product entry doors. The clean filtered air is drawn through the booth and exhausted through a filter system at the opposite end. This type of spray booth makes efficient use of shop space and is available in solid-back, drive-through and reverse-flow designs. Reverse-flow booths intake air through filters in the back wall. The solid-faced product entry doors are at the exhaust end of the booth. This provides cleaner intake filtering and better control of shop dust that might be tracked in at the vehicle entrance. The booth can be equipped with an air replacement unit and cure cycles to meet your requirements.
LIGHTING FEATURES Bright full booth illumination is provided by four-tube, 48", 32-watt fluorescent light fixtures in the angled ceiling panels and side walls. Each is mounted behind clear tempered safety glass and sealed with a gasket. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures.
PRESSURIZED CROSSDRAFT CLASSIC AUTO/TRUCK BOOTH SIDE DOWNDRAFT CLASSIC AUTO / TRUCK BOOTH The Side Downdraft intakes air from the cleaner upper levels of the shop through a filter bank in the booth ceiling. The filtered air is drawn down and away from the vehicle through exhaust filters at the floor level, along both sides. This provides efficient overspray control that reduces prep time and also provides a much healthier workplace environment without an expensive downdraft exhaust pit. When purchased as a pressurized unit, the booth can be equipped with an air replacement unit and cure cycle to meet your requirements. It is available in both drive-through and solid-back designs.
CONSTRUCTION FEATURES AND QUALITY STANDARDS All booth walls and plenum sections are made with 18-gauge galvanized steel. All product and personnel access doors are double skinned for ease of maintenance and installation. Brixon™ latches and limit switches are provided for each door opening. Classic Auto/Truck Booths are rigidly reinforced with external “I” beams.