VALUE PACK-25 AUTOMOTIVE BOOTH
This Col-Met Value-Pack Booth is a very affordable filtered air enclosure that is well lit and designed to fit in very close shop areas. The booth is a crossdraft design that intakes fresh air through filters in the product entry doors. The clean, filtered air is then drawn across the length of the booth and exhausted through filters at the back.
LIGHTING FEATURES
Bright full booth illumination is provided by nine 48” four-tube, 32-watt fluorescent light fixtures. The lights are mounted in the side walls and ceiling panels behind clear tempered safety glass and sealed with a gasket. All fixtures are
UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures.
INSTALLATION
Installation is easy. The booth is a series of panels with external pre-punched flanges that are bolted together and specifically designed to enable the end user to add or subtract a 2'-6" panel, one section at a time.
Product and personnel door hinges are welded in place to their adjacent doors and panels. All hardware, filters and sealants needed are included. Complete, step-by-step installation instructions are furnished with each spray booth unit.
CONSTRUCTION FEATURES AND QUALITY STANDARDS
All booth and plenum sections are made with 18gauge galvanized steel. Brixon™ latches and limit switches are provided for each door opening.
Exhaust is provided by a 30" tubeaxial fan with a 2HP, three-phase motor. The control panel and other electrical components may be purchased separately.
|
